Plastic Flat Bar
Lead time: 2 - 3 Days
Lead time: 2 - 3 Days
Lead time: 2 - 3 Days
Lead time: 2 - 3 Days
About Our Plastic Flat Bar
Plastic Flat Bar is used for spacing and packing strips, fascia and cover strips. It has four 90 degree corners and is easy to cut, drill and install.
The Plastic Flat Bars can be mechanically fixed using screws or depending on what they are being applied to our range of Self Adhesive Tape may be the ideal fixing solutions.
Please note - Our Flat Bars are measured with the width being the critical dimension, the thickness of the profile may vary to the stated drawing in order to achieve this. If the thickness of the flat bar is your critical requirement please contact us direct on 01473 251051 to discuss this further.
These robust flat bars are manufactured using single colour U.V stable, PVC compound meaning they can be installed internally or externally. Once installed, if they become scratched or damaged the base colour will match the surface appearance resulting in them being a non-marking solution.
If you require a slightly thinner profile, or one with a radiused corner consider our range of Plastic Flat Half Round Edging.
Can't quite find the size you're looking for? Check out our sister site Tubeway Extrusions for our full range of manufacture tooling.
Add multiple products with this icon to your basket to receive bulk discounts:
Buy 10+ packs to receive a discount of
Buy 20+ packs to receive a discount of
Buy 30+ packs to receive a discount of
If ordering 500m+ of one product we may be able to offer further discount with a production price - please ask